Heteromultivalent Ligand Display on Reversible Self-Assembled Monolayers (rSAMs): A Fluidic Platform for Tunable Influenza Virus Recognition.

We report on the design of heteromultivalent influenza A virus (IAV) receptors based on reversible self-assembled monolayers (SAMs) featuring two distinct mobile ligands. The principal layer building blocks consist of α-(4-amidinophenoxy)alkanes decorated at the ω-position with sialic acid (SA) and the neuraminidase inhibitor Zanamivir (Zan), acting as two mobile ligands binding to the complementary receptors hemagglutinin (HA) and neuraminidase (NA) on the virus surface. From ternary amphiphile mixtures comprising these ligands, the amidines spontaneously self-assemble on top of carboxylic acid-terminated SAMs to form reversible mixed monolayers (rSAMs) that are easily tunable with respect to the ligand ratio. We show that this results in the ability to construct surfaces featuring a very strong affinity for the surface proteins and specific virus subtypes. Hence, an rSAM prepared from solutions containing 15% SA and 10% Zan showed an exceptionally high affinity and selectivity for the avian IAV H7N9 (Kd = 11 fM) that strongly exceeded the affinity for other subtypes (H3N2, H5N1, H1N1). Changing the SA/Zan ratio resulted in changes in the relative preference between the four tested subtypes, suggesting this to be a key parameter for rapid adjustments of both virus affinity and selectivity.

Affinity Capillary Electrophoresis as a Tool To Characterize Molecularly Imprinted Nanogels in Solution.

In this work, an innovative and accurate affinity capillary electrophoresis (ACE) method was set up to monitor the complexation of aqueous MIP nanogels (NGs) with model cancer-related antigens. Using α2,6'- and α2,3'-sialyllactose as oversimplified cancer biomarker-mimicking templates, NGs were synthesized and characterized in terms of size, polydispersity, and overall charge. A stability study was also carried out in order to select the best storage conditions and to ensure product quality. After optimization of capillary electrophoresis conditions, injection of MIP NGs resulted in a single, sharp, and efficient peak. The mobility shift approach was applied to quantitatively estimate binding affinity, in this case resulting in an association constant of K ≈ 106 M-1. The optimized polymers further displayed a pronounced discrimination between the two sialylated sugars. The newly developed ACE protocol has the potential to become a very effective method for nonconstrained affinity screening of NG in solution, especially during the NG development phase and/or for a final accurate quantitation of the observed binding.

Elucidation of the Binding Orientation in α2,3- and α2,6-Linked Neu5Ac-Gal Epitopes toward a Hydrophilic Molecularly Imprinted Monolith.

N-Acetylneuraminic acid and its α2,3/α2,6-glycosidic linkages with galactose (Neu5Ac-Gal) are major carbohydrate antigen epitopes expressed in various pathological processes, such as cancer, influenza, and SARS-CoV-2. We here report a strategy for the synthesis and binding investigation of molecularly imprinted polymers (MIPs) toward α2,3 and α2,6 conformations of Neu5Ac-Gal antigens. Hydrophilic imprinted monoliths were synthesized from melamine monomer in the presence of four different templates, namely, N-acetylneuraminic acid (Neu5Ac), N-acetylneuraminic acid methyl ester (Neu5Ac-M), 3'-sialyllactose (3SL), and 6'-sialyllactose (6SL), in a tertiary solvent mixture at temperatures varying from -20 to +80 °C. The MIPs prepared at cryotemperatures showed a preferential affinity for the α2,6 linkage sequence of 6SL, with an imprinting factor of 2.21, whereas the α2,3 linkage sequence of 3SL resulted in nonspecific binding to the polymer scaffold. The preferable affinity for the α2,6 conformation of Neu5Ac-Gal was evident also when challenged by a mixture of other mono- and disaccharides in an aqueous test mixture. The use of saturation transfer difference nuclear magnetic resonance (STD-NMR) on suspensions of crushed monoliths allowed for directional interactions between the α2,3/α2,6 linkage sequences on their corresponding MIPs to be revealed. The Neu5Ac epitope, containing acetyl and polyalcohol moieties, was the major contributor to the sequence recognition for Neu5Ac(α2,6)Gal(ß1,4)Glc, whereas contributions from the Gal and Glc segments were substantially lower.

Towards molecularly imprinted polymers that respond to and capture phosphorylated tyrosine epitopes using fluorescent bis-urea and bis-imidazolium receptors.

Early detection of cancer is essential for successful treatment and improvement in patient prognosis. Deregulation of post-translational modifications (PTMs) of proteins, especially phosphorylation, is present in many types of cancer. Therefore, the development of materials for the rapid sensing of low abundant phosphorylated peptides in biological samples can be of great therapeutic value. In this work, we have synthesised fluorescent molecularly imprinted polymers (fMIPs) for the detection of the phosphorylated tyrosine epitope of ZAP70, a cancer biomarker. The polymers were grafted as nanometer-thin shells from functionalised submicron-sized silica particles using a reversible addition-fragmentation chain-transfer (RAFT) polymerisation. Employing the combination of fluorescent urea and intrinsically cationic bis-imidazolium receptor cross-linkers, we have developed fluorescent sensory particles, showing an imprinting factor (IF) of 5.0. The imprinted polymer can successfully distinguish between phosphorylated and non-phosphorylated tripeptides, reaching lower micromolar sensitivity in organic solvents and specifically capture unprotected peptide complements in a neutral buffer. Additionally, we have shown the importance of assessing the influence of counterions present in the MIP system on the imprinting process and final material performance. The potential drawbacks of using epitopes with protective groups, which can co-imprint with targeted functionality, are also discussed.

Enhanced selective capture of phosphomonoester lipids enabling highly sensitive detection of sphingosine 1-phosphate.

Sphingolipids play crucial roles in cellular membranes, myelin stability, and signalling responses to physiological cues and stress. Among them, sphingosine 1-phosphate (S1P) has been recognized as a relevant biomarker for neurodegenerative diseases, and its analogue FTY-720 has been approved by the FDA for the treatment of relapsing-remitting multiple sclerosis. Focusing on these targets, we here report three novel polymeric capture phases for the selective extraction of the natural biomarker and its analogue drug. To enhance analytical performance, we employed different synthetic approaches using a cationic monomer and a hydrophobic copolymer of styrene-DVB. Results have demonstrated high affinity of the sorbents towards S1P and fingolimod phosphate (FTY-720-P, FP). This evidence proved that lipids containing phosphate diester moiety in their structures did not constitute obstacles for the interaction of phosphate monoester lipids when loaded into an SPE cartridge. Our suggested approach offers a valuable tool for developing efficient analytical procedures.

Microcontact-Imprinted Optical Sensors for Virulence Factors of Periodontal Disease.

Periodontitis (gum disease) is a common biofilm-mediated oral condition, with around 7% of the adult population suffering from severe disease with risk for tooth loss. Moreover, periodontitis virulence markers have been found in atherosclerotic plaque and brain tissue, suggesting a link to cardiovascular and Alzheimer's diseases. The lack of accurate, fast, and sensitive clinical methods to identify patients at risk leads, on the one hand, to patients being undiagnosed until the onset of severe disease and, on the other hand, to overtreatment of individuals with mild disease, diverting resources from those patients most in need. The periodontitis-associated bacterium, Porphyromonas gingivalis, secrete gingipains which are highly active proteases recognized as key virulence factors during disease progression. This makes them interesting candidates as predictive biomarkers, but currently, there are no methods in clinical use for monitoring them. Quantifying the levels or proteolytic activity of gingipains in the periodontal pocket surrounding the teeth could enable early-stage disease diagnosis. Here, we report on a monitoring approach based on high-affinity microcontact imprinted polymer-based receptors for the Arg and Lys specific gingipains Rgp and Kgp and their combination with surface plasmon resonance (SPR)-based biosensor technology for quantifying gingipain levels in biofluids and patient samples. Therefore, Rgp and Kgp were immobilized on glass coverslips followed by microcontact imprinting of poly-acrylamide based films anchored to gold sensor chips. The monomers selected were N-isopropyl acrylamide (NIPAM), N-hydroxyethyl acrylamide (HEAA) and N-methacryloyl-4-aminobenzamidine hydrochloride (BAM), with N,N'-methylene bis(acrylamide) (BIS) as the crosslinker. This resulted in imprinted surfaces exhibiting selectivity towards their templates high affinity and selectivity for the templated proteins with dissociation constants (K d) of 159 and 299 nM for the Rgp- and Kgp-imprinted, surfaces respectively. The former surface displayed even higher affinity (K d = 71 nM) when tested in dilute cell culture supernatants. Calculated limits of detection for the sensors were 110 and 90 nM corresponding to levels below clinically relevant concentrations.

Terminally Phosphorylated Triblock Polyethers Acting Both as Templates and Pore-Forming Agents for Surface Molecular Imprinting of Monoliths Targeting Phosphopeptides.

The novel process reported here described the manufacture of monolithic molecularly imprinted polymers (MIPs) using a terminally functionalized block copolymer as the imprinting template and pore-forming agent. The MIPs were prepared through a step-growth polymerization process using a melamine-formaldehyde precondensate in a biphasic solvent system. Despite having a relatively low imprinting factor, the use of MIP monolith in liquid chromatography demonstrated the ability to selectively target desired analytes. An MIP capillary column was able to separate monophosphorylated peptides from a tryptic digest of bovine serum albumin. Multivariate data analysis and modeling of the phosphorylated and nonphosphorylated peptide retention times revealed that the number of phosphorylations was the strongest retention contributor for peptide retention on the monolithic MIP capillary column.

Reversible Self-Assembled Monolayers with Tunable Surface Dynamics for Controlling Cell Adhesion Behavior.

Cells adhering onto surfaces sense and respond to chemical and physical surface features. The control over cell adhesion behavior influences cell migration, proliferation, and differentiation, which are important considerations in biomaterial design for cell culture, tissue engineering, and regenerative medicine. Here, we report on a supramolecular-based approach to prepare reversible self-assembled monolayers (rSAMs) with tunable lateral mobility and dynamic control over surface composition to regulate cell adhesion behavior. These layers were prepared by incubating oxoacid-terminated thiol SAMs on gold in a pH 8 HEPES buffer solution containing different mole fractions of ω-(ethylene glycol)2-4- and ω-(GRGDS)-, α-benzamidino bolaamphiphiles. Cell shape and morphology were influenced by the strength of the interactions between the amidine-functionalized amphiphiles and the oxoacid of the underlying SAMs. Dynamic control over surface composition, achieved by the addition of inert filler amphiphiles to the RGD-functionalized rSAMs, reversed the cell adhesion process. In summary, rSAMs featuring mobile bioactive ligands offer unique capabilities to influence and control cell adhesion behavior, suggesting a broad use in biomaterial design, tissue engineering, and regenerative medicine.

Oxytocin-Selective Nanogel Antibody Mimics.

Oxytocin imprinted polymer nanoparticles were synthesized by glass bead supported solid phase synthesis, with NMR and molecular dynamics studies used to investigate monomer-template interactions. The nanoparticles were characterized by dynamic light scattering, scanning- and transmission electron microscopy and X-ray photoelectron spectroscopy. Investigation of nanoparticle-template recognition using quartz crystal microbalance-based studies revealed sub-nanomolar affinity, kd ≈ 0.3 ± 0.02 nM (standard error of the mean), comparable to that of commercial polyclonal antibodies, kd ≈ 0.02-0.2 nM.

Nano-sized magnetic core-shell and bulk molecularly imprinted polymers for selective extraction of amiodarone from human plasma.

Bulk and magnetic core-shell Molecularly Imprinted Polymers (MMIPs) have been introduced and compared to extract and determine amiodarone from a complex matrix, i.e., plasma, due to the importance of Therapeutic Drug Monitoring (TDM). Polymer synthesis was confirmed by FTIR, AFM, TGA, DLS, VSM, TEM, and the adsorption studies such as capacity, isothermal models, selectivity, and regeneration were performed to evaluate and compare polymer efficiency in extraction and separation of amiodarone from sample solutions and human plasma. Both nano-sized and bulk polymers successfully extracted the target molecule at the low therapeutic ranges and the overdose concentrations (recoveries of 98.38%-102.70%). The maximum adsorption capacity of the MMIPs was 42.5 µg/mg compared with 2.6 µg/mg for bulk polymers. The imprinting factors of the polymers were 15.12 and 6.84 for MMIPs and bulk, respectively. MMIPs and bulk polymers presented 4.68 and 1.66 selectivity factors, respectively, towards amiodarone compared with lidocaine. LOD, LOQ, and enrichment factor in human plasma were 0.09, 0.28 µg mL-1, and 10 respectively. Recoveries of therapeutic concentration from plasma were 91.38 and 97.33% for bulk and MMIPs, respectively. MMIPs as an adsorbent in amiodarone extraction from plasma offered reduced necessary sample amount, less adsorbent consumption, reduced pretreatment time, and reduced elution solvent waste while yielding higher extraction recovery and more specificity for the target compared with the bulk polymer. Bulk polymers have a more straightforward synthesis procedure due to fewer synthesis steps and fewer variables, and Molecularly Imprinted Polymer Solid-phase Extraction (MIP-SPE) has already been introduced commercially. MMIPs prevail on a small scale, and in the context of a simple extraction, separation, or concentration in large-scale bioanalysis, efforts towards optimization and development of MMIPs can unearth tremendous opportunities for green chemistry principles.

Oxoanion Imprinting Combining Cationic and Urea Binding Groups: A Potent Glyphosate Adsorber.

The use of polymerizable hosts in anion imprinting has led to powerful receptors with high oxyanion affinity and specificity in both aqueous and non-aqueous environments. As demonstrated in previous reports, a carefully tuned combination of orthogonally interacting binding groups, for example, positively charged and neutral hydrogen bonding monomers, allows receptors to be constructed for use in either organic or aqueous environments, in spite of the polymer being prepared in non-competitive solvent systems. We here report on a detailed experimental design of phenylphosphonic and benzoic acid-imprinted polymer libraries prepared using either urea- or thiourea-based host monomers in the presence or absence of cationic comonomers for charge-assisted anion recognition. A comparison of hydrophobic and hydrophilic crosslinking monomers allowed optimum conditions to be identified for oxyanion binding in non-aqueous, fully aqueous, or high-salt media. This showed that recognition improved with the water content for thiourea-based molecularly imprinted polymers (MIPs) based on hydrophobic EGDMA with an opposite behavior shown by the polymers prepared using the more hydrophilic crosslinker PETA. While the affinity of thiourea-based MIPs increased with the water content, the opposite was observed for the oxourea counterparts. Binding to the latter could however be enhanced by raising the pH or by the introduction of cationic amine- or Na+-complexing crown ether-based comonomers. Use of high-salt media as expected suppressed the amine-based charge assistance, whereas it enhanced the effect of the crown ether function. Use of the optimized receptors for removing the ubiquitous pesticide glyphosate from urine finally demonstrated their practical utility.

Tailored Polymer-Based Selective Extraction of Lipid Mediators from Biological Samples.

Lipid mediators, small molecules involved in regulating inflammation and its resolution, are a class of lipids of wide interest as their levels in blood and tissues may be used to monitor health and disease states or the effect of new treatments. These molecules are present at low levels in biological samples, and an enrichment step is often needed for their detection. We describe a rapid and selective method that uses new low-cost molecularly imprinted (MIP) and non-imprinted (NIP) polymeric sorbents for the extraction of lipid mediators from plasma and tissue samples. The extraction process was carried out in solid-phase extraction (SPE) cartridges, manually packed with the sorbents. After extraction, lipid mediators were quantified by liquid chromatography-tandem mass spectrometry (LC-MSMS). Various parameters affecting the extraction efficiency were evaluated to achieve optimal recovery and to reduce non-specific interactions. Preliminary tests showed that MIPs, designed using the prostaglandin biosynthetic precursor arachidonic acid, could effectively enrich prostaglandins and structurally related molecules. However, for other lipid mediators, MIP and NIP displayed comparable recoveries. Under optimized conditions, the recoveries of synthetic standards ranged from 62% to 100%. This new extraction method was applied to the determination of the lipid mediators concentration in human plasma and mouse tissues and compared to other methods based on commercially available cartridges. In general, the methods showed comparable performances. In terms of structural specificity, our newly synthesized materials accomplished better retention of prostaglandins (PGs), hydroxydocosahexaenoic acid (HDoHE), HEPE, hydroxyeicosatetraenoic acids (HETE), hydroxyeicosatrienoic acid (HETrE), and polyunsaturated fatty acid (PUFA) compounds, while the commercially available Strata-X showed a higher recovery for dihydroxyeicosatetraenoic acid (diHETrEs). In summary, our results suggest that this new material can be successfully implemented for the extraction of lipid mediators from biological samples.

Combinatorial Design of a Sialic Acid-Imprinted Binding Site.

Aberrant glycosylation has been proven to correlate with various diseases including cancer. An important alteration in cancer progression is an increased level of sialylation, making sialic acid one of the key constituents in tumor-specific glycans and an interesting biomarker for a diversity of cancer types. Developing molecularly imprinted polymers (MIPs) with high affinity toward sialic acids is an important task that can help in early cancer diagnosis. In this work, the glycospecific MIPs are produced using cooperative covalent/noncovalent imprinting. We report here on the fundamental investigation of this termolecular imprinting approach. This comprises studies of the relative contribution of orthogonally interacting functional monomers and their synergetic behavior and the choice of different counterions on the molecular recognition properties for the sialylated targets. Combining three functional monomers targeting different functionalities on the template led to enhanced imprinting factors (IFs) and selectivities. This apparent cooperative effect was supported by 1H NMR and fluorescence titrations of monomers with templates or template analogs. Moreover, highlighting the role of the template counterion use of tetrabutylammonium (TBA) salt of sialic acid resulted in better imprinting than that of sodium salts supported by both in solution interaction studies and in MIP rebinding experiments. The glycospecific MIPs display high affinity for sialylated targets, with an overall low binding of other nontarget saccharides.

Selective Enrichment of Histidine Phosphorylated Peptides Using Molecularly Imprinted Polymers.

Protein histidine phosphorylation (pHis) is involved in molecular signaling networks in bacteria, fungi, plants, and higher eukaryotes including mammals and is implicated in human diseases such as cancer. Detailed investigations of the pHis modification are hampered due to its acid-labile nature and consequent lack of tools to study this post-translational modification (PTM). We here demonstrate three molecularly imprinted polymer (MIP)-based reagents, MIP1-MIP3, for enrichment of pHis peptides and subsequent characterization by chromatography and mass spectrometry (LC-MS). The combination of MIP1 and ß-elimination provided some selectivity for improved detection of pHis peptides. MIP2 was amenable to larger pHis peptides, although with poor selectivity. Microsphere-based MIP3 exhibited improved selectivity and was amenable to enrichment and detection by LC-MS of pHis peptides in tryptic digests of protein mixtures. These MIP protocols do not involve any acidic solvents during sample preparation and enrichment, thus preserving the pHis modification. The presented proof-of-concept results will lead to new protocols for highly selective enrichment of labile protein phosphorylations using molecularly imprinted materials.

Combinatorial design of a sialic acid imprinted binding site exploring a dual ion receptor approach.

Aberrant sialic acid expression is one of the key indicators of pathological processes. This acidic saccharide is overexpressed in tumor cells and is a potent biomarker. Development of specific capture tools for various sialylated targets is an important step for early cancer diagnosis. However, sialic acid recognition by synthetic hosts is often complicated due to the competition for the anion binding by their counterions, such as Na+ and K+. Here we report on the design of a sialic acid receptor via simultaneous recognition of both the anion and cation of the target analyte. The polymeric receptor was produced using neutral (thio)urea and crown ether based monomers for simultaneous complexation of sialic acid's carboxylate group and its countercation. Thiourea and urea based functional monomers were tested both in solution by 1H NMR titration and in a polymer matrix system for their ability to complex the sodium salt of sialic acid alone and in the presence of crown ether. Combination of both orthogonally acting monomers resulted in higher affinities for the template in organic solvent media. The imprinted polymers displayed enhanced sialic acid recognition driven to a significant extent by the addition of the macrocyclic cation host. The effect of various counterions and solvent systems on the binding affinities is reported. Binding of K+, Na+ and NH4 + salts of sialic acid exceeded the uptake of bulky lipophilic salts. Polymers imprinted with sialic or glucuronic acids displayed a preference for their corresponding templates and showed a promising enrichment of sialylated peptides from the tryptic digest of glycoprotein bovine fetuin.

Discrimination between sialic acid linkage modes using sialyllactose-imprinted polymers.

Glycosylation plays an important role in various pathological processes such as cancer. One key alteration in the glycosylation pattern correlated with cancer progression is an increased level as well as changes in the type of sialylation. Developing molecularly-imprinted polymers (MIPs) with high affinity for sialic acid able to distinguish different glycoforms such as sialic acid linkages is an important task which can help in early cancer diagnosis. Sialyllactose with α2,6' vs. α2,3' sialic acid linkage served as a model trisaccharide template. Boronate chemistry was employed in combination with a library of imidazolium-based monomers targeting the carboxylate group of sialic acid. The influence of counterions of the cationic monomers and template on their interactions was investigated by means of 1H NMR titration studies. The highest affinities were afforded using a combination of Br- and Na+ counterions of the monomers and template, respectively. The boronate ester formation was confirmed by MS and 1H/11B NMR, indicating 1 : 2 stoichiometries between sialyllactoses and boronic acid monomer. Polymers were synthesized in the form of microparticles using boronate and imidazolium monomers. This combinatorial approach afforded MIPs selective for the sialic acid linkages and compatible with an aqueous environment. The molecular recognition properties with respect to saccharide templates and glycosylated targets were reported.

Selective detection of phospholipids using molecularly imprinted fluorescent sensory core-shell particles.

Sphingosine-1-phosphate (S1P) is a bioactive sphingo-lipid with a broad range of activities coupled to its role in G-protein coupled receptor signalling. Monitoring of both intra and extra cellular levels of this lipid is challenging due to its low abundance and lack of robust affinity assays or sensors. We here report on fluorescent sensory core-shell molecularly imprinted polymer (MIP) particles responsive to near physiologically relevant levels of S1P and the S1P receptor modulator fingolimod phosphate (FP) in spiked human serum samples. Imprinting was achieved using the tetrabutylammonium (TBA) salt of FP or phosphatidic acid (DPPA·Na) as templates in combination with a polymerizable nitrobenzoxadiazole (NBD)-urea monomer with the dual role of capturing the phospho-anion and signalling its presence. The monomers were grafted from ca 300 nm RAFT-modified silica core particles using ethyleneglycol dimethacrylate (EGDMA) as crosslinker resulting in 10-20 nm thick shells displaying selective fluorescence response to the targeted lipids S1P and DPPA in aqueous buffered media. Potential use of the sensory particles for monitoring S1P in serum was demonstrated on spiked serum samples, proving a linear range of 18-60 µM and a detection limit of 5.6 µM, a value in the same range as the plasma concentration of the biomarker.

Urea-Based Imprinted Polymer Hosts with Switchable Anion Preference.

The design of artificial oxyanion receptors with switchable ion preference is a challenging goal in host-guest chemistry. We here report on molecularly imprinted polymers (MIPs) with an external phospho-sulpho switch driven by small molecule modifiers. The polymers were prepared by hydrogen bond-mediated imprinting of the mono- or dianions of phenyl phosphonic acid (PPA), phenyl sulfonic acid (PSA), and benzoic acid (BA) using N-3,5-bis-(trifluoromethyl)-phenyl-N-4-vinylphenyl urea (1) as the functional host monomer. The interaction mode between the functional monomer and the monoanions was elucidated by 1H NMR titrations and 1H-1H NMR NOESY supported by molecular dynamic simulation, which confirmed the presence of high-order complexes. PPA imprinted polymers bound PPA with an equilibrium constant Keq = 1.8 × 105 M-1 in acetonitrile (0.1% 1,2,2,6,6-pentamethylpiperidine) and inorganic HPO42- and SO42- with Keq = 2.9 × 103 M-1 and 4.5 × 103 M-1, respectively, in aqueous buffer. Moreover, the chromatographic retentivity of phosphonate versus sulfonate was shown to be completely switched on this polymer when changing from a basic to an acidic modifier. Mechanistic insights into this system were obtained from kinetic investigations and DSC-, MALDI-TOF-MS-, 1H NMR-studies of linear polymers prepared in the presence of template. The results suggest the formation of template induced 1-1 diad repeats in the polymer main chain shedding unique light on the relative contributions of configurational and conformational imprinting.

Molecularly Imprinted Polymers for the Removal of Antidepressants from Contaminated Wastewater.

Selective serotonin reuptake inhibitors (SSRIs) are a class of antidepressants regularly detected in the environment. This indicates that the existing wastewater treatment techniques are not successfully removing them beforehand. This study investigated the potential of molecularly imprinted polymers (MIPs) to serve as sorbents for removal of SSRIs in water treatment. Sertraline was chosen as the template for imprinting. We optimized the composition of MIPs in order to obtain materials with highest capacity, affinity, and selectivity for sertraline. We report the maximum capacity of MIP for sertraline in water at 72.6 mg g-1, and the maximum imprinting factor at 3.7. The MIPs were cross-reactive towards other SSRIs and the metabolite norsertraline. They showed a stable performance in wastewater-relevant pH range between 6 and 8, and were reusable after a short washing cycle. Despite having a smaller surface area between 27.4 and 193.8 m2·g-1, as compared to that of the activated carbon at 1400 m2·g-1, their sorption capabilities in wastewaters were generally superior. The MIPs with higher surface area and pore volume that formed more non-specific interactions with the targets considerably contributed to the overall removal efficiency, which made them better suited for use in wastewater treatment.

Selective Enrichment of Phosphorylated Peptides by Monolithic Polymers Surface Imprinted with bis-Imidazolium Moieties by UV-Initiated Cryopolymerization.

Reversible protein phosphorylation on serine, threonine, and tyrosine residues is essential for fast, specific, and accurate signal transduction in cells. Up to now, the identification and quantification of phosphorylated amino acids, peptides, and proteins continue to be one of the significant challenges in contemporary bioanalytical research. In this paper, a series of surface grafted monoliths in the capillary format targeting phosphorylated serine has been prepared by first synthesizing a monolithic core substrate material based on trimethylolpropane trimethacrylate, onto which a thin surface-imprinted layer was established by oriented photografting of a variety of mono- and bis-imidazolium host monomers at subzero temperature, using six different continuous or pulsed UV light sources. The imprinted monolith capillaries were evaluated in a capillary liquid chromatographic system connected to a mass spectrometer in order to test the specific retention of phosphorylated peptides. Site-specific recognition selectivity and specificity for phosphorylated serine was demonstrated when separating amino acids and peptides, proving that the optimized materials could be used as novel trapping media in affinity-based phosphoproteomic analysis.